Jackery HomePower 2000 Ultra Solar Balcony Kit
-
2,800 W Solar Input: 2,000 W MPPT x2 + 800 W Microinverter
-
2-Year Payback: Up to €1,304 in annual electricity savings
- AC Input: 2,300 W / AC Output: 1,500 W
-
Intelligent Fire Safety System: Detection → Alarm → Automatic Fire Suppression
-
0% Waste: 10 W precision within 3 seconds
-
Dynamic Electricity Tariffs: Smart control via the Jackery Home App
- Jackery Hybrid Charge: 80% in 52 Min.
- -20 to 55 °C / IP65 Waterproof / 10-Year Warranty
The Netherlands - 0% VAT
Jackery HomePower 2000 Ultra Solar Balcony Kit

2 Years Payback, 10 Years of Returns
空盒子版块
此处仅用于版块位置标记,方便排序,请在预览或发布页查看最终效果。
配置:
1. 通过Handle (embed-component-14)内嵌此页面中对应的组件。
2. 可摆脱不能批量添加数据的限制。
Dynamic Electricity Tariffs: Charge at the Lowest Price
Smart Assistant, 0 Waste Efficiency
Maximize Savings with Shelly Smart Accessories: Precise Control from a Single Device to Whole Home Energy System.
1-second connection with Shelly, efficient energy management to maximize your self-consumption rate and minimize grid usage.
Note:
The Jackery HomePower 2000 Ultra is compatible with two Shelly energy meters – choose the appropriate model based on your home's power grid:
Shelly Pro EM 50: Recommended for households with a single-phase power connection, such as small apartments. In the Jackery app, the option Phase A + B should be selected to ensure optimal power compensation by the HomePower 2000 Ultra. The Shelly Pro EM 50 is available directly in the Jackery store.
Shelly Pro 3EM: Ideal for households with a three-phase power connection, which is common in single-family homes or larger households. This solution enables comprehensive real-time monitoring of power consumption throughout the entire home and allows switching between single-phase and three-phase operation. Full compatibility of the Jackery HomePower 2000 Ultra with the Shelly Pro 3EM will be available starting mid-July.
If you need the Shelly Pro 3EM now, we recommend purchasing it directly from the official Shelly website: www.shelly.com.
1500W Emergency Power Supply
In on-grid mode, the AC Load port delivers up to 1500W, but limits connected loads to 800W for safety, while in off-grid mode, it supplies 800W, with automatic switching within 20ms to ensure smooth operation during outages.
2800 W Smart Solar Power with Powerful Performance

Jackery HomePower 2000 Ultra – Flexible Savings with Solar Power
The HomePower 2000 Ultra balcony power plant is compatible with 99% of all solar panels and microinverters. Benefit from up to 2800 W of solar input — with up to 800 W via microinverter and dual MPPT for up to 2,000 W PV input. Thanks to its plug-and-play design, it’s ready to use in just 5 minutes.

Intelligent Fire Protection System
Combined with the intelligent fire protection system, the HomePower 2000 Ultra provides three levels of safety: early risk detection, instant alerts, and automatic activation of the protection mechanism using an aerosol fire suppressant.

Plug & Play With One-Click Start
0 Drilling, 3 Cables, 5 Minutes* Installation
200W Ultra-Lightweight Flexible Solar Panels
Just 3.2kg, Effortless Installation
One-Third The Weight Of Traditional 200W Glass Panels. Easy To Install.
One-Click Start With Plug & Play Operation
Simple Control For Everyone, Whether Expert Or Beginner
Precise Control Of Individual Devices For Perfect Performance
HomePower 2000 Ultra Balcony Power Station: Dependable, Protective Power
空盒子版块
此处仅用于版块位置标记,方便排序,请在预览或发布页查看最终效果。
配置:
1. 通过Handle (embed-component-13)内嵌此页面中对应的组件。
2. 可摆脱不能批量添加数据的限制。
空盒子版块
此处仅用于版块位置标记,方便排序,请在预览或发布页查看最终效果。
配置:
1. 通过Handle (blog-01)内嵌此页面中对应的组件。
2. 可摆脱不能批量添加数据的限制。
Note
*Note 1:
The maximum solar input of 2,800W can only be achieved when the AC grid output reaches 800W. Actual performance may vary depending on system configuration and environmental conditions.
*Note 2 :
The “2 Years Payback” claim is based on the following system setup: Jackery HomePower 2000 Ultra, 2,800W solar input, smart meter, and four mounts.
*Note 3 :
The Jackery HomePower 2000 Ultra supports an input of 2,800W and generates up to 3,360 kWh per year.
*Note 4 :
Based on an average price of €2.50 per cup of coffee. Actual prices may vary.
*Note 5 :
Calculation is based on an electricity price of €0.40 per kWh. Actual savings may vary depending on usage and conditions. The annual savings of €1,304 are based on the following system setup: Jackery HomePower 2000 Ultra, three expansion batteries (2 kWh each), 2,800W solar input, smart meter, and four mounts. The self-consumption rate is based on data analysis from HTW Berlin (https://solar.htw-berlin.de/rechner/unabhaengigkeitsrechner). Actual values may vary depending on usage and conditions.
Product Details
Specifications in Pictures

- DC Input Port (PV1+)
- DC Input Port (PV1-)
- DC Input Port (PV2+)
- DC Input Port (PV2-)
- Earth Terminal
- Battery Expansion Port
- Antenna
- C Input/Output Port for Grid Connection (Grid)
- Valve
- AC Input/Output Port (AC Load)
Specifications
What's in The Box

HomePower 2000 Ultra
X1
MC4 Cable Remover
X1
AC Ongrid Cable
X1
MC4 Solar Cable
X4
Hook-and-Loop Strip
X4
200W Solar Panel
X4
MC4 Solar Cable (Pair)
X3
Rope
X8
Anchor Bolt
X2
Screw
X2
User Manual
-
Jackery Explorer 2000 Pro Portable Power Station
DOWNLOAD
FAQ
-
What is the off-grid output power?
-
How to expand battery capacity?
-
How does Self-Consumption mode work?
-
How to set Time-of-Use (TOU) mode?
-
What should we pay attention to when HP2000 Ultra is not in use?
-
How to achieve zero energy waste?
-
What is the standby power consumption of the HP2000 Ultra?
-
Can the HomePower 2000 Ultra feed power or can it only power a single load?
-
What does the AC Couple function mean?
-
Will the HomePower 2000 Ultra not work during a power outage?
-
Are third-party solar panels supported? What solar panels are compatible with HomePower 2000 Ultra and how do users connect them?
-
Can I connect connect third party micro-inverters to the HP2000 Ultra?
-
HomePower 2000 Ultra compatibility with smart energy meter ?
-
How to use Shelly CT
-
How many smart sockets can HomePower 2000 Ultra support?
-
How to configure via the App?
-
How should I troubleshoot or resolve this when the APP is showing a ground fault during use ?