PV modules generate electricity
1. PV modules generate electricity
Sunlight is converted into direct current (DC).
€0,00
Currently Shipping to the Netherlands/Austria Only
空盒子版块
此处仅用于版块位置标记,方便排序,请在预览或发布页查看最终效果。
1. 通过Handle (embed-component-14)内嵌此页面中对应的组件。
2. 可摆脱不能批量添加数据的限制。
Dynamic Electricity Tariffs: Charge at the Lowest Price
When electricity prices are high, your system prioritizes powering your home with stored energy or feeding it back into the grid. This optimizes your self-consumption rate and significantly increases your energy savings
With built-in dynamic pricing control, the Jackery Home app automatically identifies the cheapest electricity rates — usually at night or during periods of low grid demand — and charges your system accordingly. This helps you reduce energy costs regardless of sunlight availability.
Note : The desired price cap must be set manually by the user in the app. Within this limit, intelligent charging adjustments are made automatically.
By Time of Use mode, you can set a target price and make a Charging Schedule according to the real-time electricity price with the Jackery Home APP.
Smart Assistant, 0 Waste Efficiency
Maximize Savings with Shelly Smart Accessories: Precise Control from a Single Device to Whole Home Energy System.
1-second connection with Shelly, efficient energy management to maximize your self-consumption rate and minimize grid usage.
Note:
The Jackery HomePower 2000 Ultra is compatible with two Shelly energy meters – choose the appropriate model based on your home's power grid:
Shelly Pro EM 50: Recommended for households with a single-phase power connection, such as small apartments. In the Jackery app, the option Phase A + B should be selected to ensure optimal power compensation by the HomePower 2000 Ultra. The Shelly Pro EM 50 is available directly in the Jackery store.
Shelly Pro 3EM: Ideal for households with a three-phase power connection, which is common in single-family homes or larger households. This solution enables comprehensive real-time monitoring of power consumption throughout the entire home and allows switching between single-phase and three-phase operation. Full compatibility of the Jackery HomePower 2000 Ultra with the Shelly Pro 3EM will be available starting mid-July.
If you need the Shelly Pro 3EM now, we recommend purchasing it directly from the official Shelly website: www.shelly.com.
1500W Emergency Power Supply
In on-grid mode, the AC Load port delivers up to 1500W, but limits connected loads to 800W for safety, while in off-grid mode, it supplies 800W, with automatic switching within 20ms to ensure smooth operation during outages.
Jackery HomePower 2000 Ultra – Flexible Savings with Solar Power
The HomePower 2000 Ultra balcony power plant is compatible with 99% of all solar panels and microinverters. Benefit from up to 2800 W of solar input — with up to 800 W via microinverter and dual MPPT for up to 2,000 W PV input. Thanks to its plug-and-play design, it’s ready to use in just 5 minutes.
Intelligent Fire Protection System
Combined with the intelligent fire protection system, the HomePower 2000 Ultra provides three levels of safety: early risk detection, instant alerts, and automatic activation of the protection mechanism using an aerosol fire suppressant.
0 Drilling, 3 Cables, 5 Minutes* Installation
Attach Padlocks To The Solar Panel
Secure both ends with ropes: first lightly tighten the rope clamp, then pass the rope through the eyelets and tensioner.
Hang The Lightweight Solar Panel On The Balcony
Place the panel over the railing. Finally, tighten the rope clamp securely.
Connect The Solar Panel To The Power Cable
Connect The Panel To The HomePower 2000 Ultra
200W Ultra-Lightweight Flexible Solar Panels
Just 3.2kg, Effortless Installation
One-Third The Weight Of Traditional 200W Glass Panels. Easy To Install.
One-Click Start With Plug & Play Operation
Simple Control For Everyone, Whether Expert Or Beginner
Precise Control Of Individual Devices For Perfect Performance
IP65 Water & Dust Protection
With IP65 rating, durability and functionality come together – the perfect choice for balconies, garages, terraces, and more.
-20°C to +55°C
Cold-resistant with integrated heating technology that ensures excellent performance in extreme weather conditions from -20°C to 55°C.
≤10 dB Whisper-Quiet
Operating noise is only 10 dB, ensuring a peaceful night.
HomePower 2000 Ultra Balcony Power Station: Dependable, Protective Power
10-Year Warranty
Choosing us means peace of mind. The 10-year warranty of the HomePower 2000 Ultra offers complete protection — from installation to maintenance and beyond.
Over 100 Safety Certifications
Certified safe across battery, inverter, storage, and management systems — four levels of protection you can trust.
Over 1000 Rigorous Tests
Resistant to high temperatures, humidity, vibrations, and other harsh conditions.
空盒子版块
此处仅用于版块位置标记,方便排序,请在预览或发布页查看最终效果。
1. 通过Handle (embed-component-13)内嵌此页面中对应的组件。
2. 可摆脱不能批量添加数据的限制。
空盒子版块
此处仅用于版块位置标记,方便排序,请在预览或发布页查看最终效果。
1. 通过Handle (blog-01)内嵌此页面中对应的组件。
2. 可摆脱不能批量添加数据的限制。
Note
*Note 1:
The maximum solar input of 2,800W can only be achieved when the AC grid output reaches 800W. Actual performance may vary depending on system configuration and environmental conditions.
*Note 2 :
The “2 Years Payback” claim is based on the following system setup: Jackery HomePower 2000 Ultra, 2,800W solar input, smart meter, and four mounts.
*Note 3 :
The Jackery HomePower 2000 Ultra supports an input of 2,800W and generates up to 3,360 kWh per year.
*Note 4 :
Based on an average price of €2.50 per cup of coffee. Actual prices may vary.
*Note 5 :
Calculation is based on an electricity price of €0.40 per kWh. Actual savings may vary depending on usage and conditions. The annual savings of €1,304 are based on the following system setup: Jackery HomePower 2000 Ultra, three expansion batteries (2 kWh each), 2,800W solar input, smart meter, and four mounts. The self-consumption rate is based on data analysis from HTW Berlin (https://solar.htw-berlin.de/rechner/unabhaengigkeitsrechner). Actual values may vary depending on usage and conditions.
Jackery Explorer 2000 Pro Portable Power Station
DOWNLOADDuring outages or in need of an extra socket, an appliance can be pluged directly into HP2000 Ultra with up to 1500VA (requires battery SOC ≥5% and normal temperature).
Stack up to 3×HomePower Battery 2000 for 8kWh total.
Solar powers loads first, excess energy charges the battery or feeds the grid.
In the app, users can define specific charge and discharge periods where HP2000 Ultra will either charge the battery or power loads accordingly. When neither charging nor discharging is active, PV power generated by the system will be directly fed into the grid while any excess energy beyond grid requirements will automatically be routed to charge the battery.
Charge to 50% SOC, disconnect cables, and store in a dry place (0-25°C).
Pair with Shelly Pro 3EM to dynamically adjust output.
The standby power consumption of the HP2000 Ultra is 3W.
In addition to using the off-grid port to power a single load, HomePower 2000 Ultra can also output power through the grid-connected port to multiple household loads and feed excess power to the grid.
If the rooftop PV system and inverter are connected, and in full sunlight, the rooftop PV system provides power to the household loads, but there is still excess energy, you need to connect the Shelly smart meter with the HP 2000U. Then enable the AC-Couple function in the app to store the excess energy from the home grid into the HP 2000U.
With the Shelly smart meter, the HomePower 2000 Ultra can identify surplus energy in the home grid and prioritize it for storage in the HomePower 2000 Ultra. Combined with the device’s self-use function, it can discharge during peak hours, optimizing energy savings.
This feature is expected to be launched in July, so stay tuned!
When a power outage occurs, HomePower 2000 Ultra will immediately stop using the grid-connected port to feed power to protect the safety of power maintenance workers. However, the photovoltaic input function and off-grid port can also be used normally during a power outage, providing a maximum of 2000W of photovoltaic input and 1500W of AC output to ensure the quality of life of users.
Yes, third party solar panels ranging from 11V to 60V are supported.
HomePower 2000 Ultra is equipped with two MPPTs and two pairs of standard PV-MC4 interfaces. The maximum current of each MPPT is 26A and the maximum voltage is 60V.
Therefore, we recommend that the solar panel connected to each PV interface should comply with the following specifications: the open circuit voltage should be between 17.5V and 60V, and the current should not exceed 26A.
If the current is low, it is possible to connect multiple solar panels in parallel to one PV interface, but series connection is generally not recommended.
The following are examples of Jackery's existing solar panel models:
Jackery SolarSaga Series: These solar panels need to be connected to the HomePower 2000 Ultra via an adapter.
Jackery 200W Flexible Solar Panel: Series connection is not allowed, each PV interface can connect up to 4 solar panels in parallel, a total of 8. The required Y-adapter is already included in the packaging of the solar panel.
Third-party solar panels (flexible or rigid) may also be compatible with the HomePower 2000 Ultra, as long as the parameters are met. For more exact determination, please contact support.
Third party micro-inverters can be connected to the HP2000 Ultra via AC Load port with a max input power of 800W.
The HomePower 2000 Ultra is currently compatible with the following Shelly models:
Shelly Pro EM-50
Shelly Pro 3EM 120A
Shelly Plus Plug S
Shelly Plug S Gen3
Additionally, Everhome's Ecotracker is expected to be supported in July 2025. Further integration with smart IoT devices is in development.
(The smart energy meters needs to be purchased separately. Currently, Jackery store sells smart energy meter - Shelly Pro EM-50.)
There are two ways to establish a connection:
1. Through the Shelly app: First configure the smart IoT device in the Shelly app, then add a button to connect the HomePower 2000 Ultra through the device interface of the Jackery Home app.
2. Directly through the Jackery Home app: Alternatively, you can also connect the Shelly device to the HomePower 2000 Ultra directly in the Jackery Home app.
(The Shelly CT needs to be purchased separately. Currently, Jackery store sells Shelly CT - Shelly Pro EM-50.)
HomePower 2000 Ultra currently supports up to 4 smart sockets.
(The smart sockets needs to be purchased separately. Currently, Jackery store sells smart socket - Smart Plug Pro.)
Use Jackery Home App via Wi-Fi (2.4GHz) to set modes like Self-Consumption, TOU or backup.
If the app reports a ground error, first try changing the outlet or click the "Update" button to install the latest version of the software. If the ground fault persists, it may be because the device is not properly grounded through the outlet. In this case, please contact customer service and provide the serial number so that they can help you resolve the issue.
PV modules generate electricity
1. PV modules generate electricity
Sunlight is converted into direct current (DC).
HomPower 2000 Ultra feeds power
2. HomPower 2000 Ultra feeds power
The microinverter converts the electricity into AC and feeds it into the home grid.
Household appliances use power
3. Household appliances use the power
Devices consume the generated electricity directly – and save costs.
HomePower 2000 Ultra Solar System
With 2,800 W of solar power, you can generate 3,360 kWh³ per year, saving €19,560 over 15 years. That’s enough for about 7,800 cups of coffee⁴.
Product Video
The Ultra-Safe Balcony Power Station With Smart Fire Protection
More